- NVIDIA GeForce RTX 4060 / 4070 S/Ti/TiS (AD104/103)
- Kormányok / autós szimulátorok topicja
- Intel Core i5 / i7 / i9 "Alder Lake-Raptor Lake/Refresh" (LGA1700)
- Idén mutatkozhat be a MediaTek és az NVIDIA PC-s rendszerchipje
- Házi barkács, gányolás, tákolás, megdöbbentő gépek!
- Milyen SSD-t vegyek?
- Milyen monitort vegyek?
- Házimozi haladó szinten
- Valami baja van a tápomnak
- AMD Ryzen 9 / 7 / 5 7***(X) "Zen 4" (AM5)
Hirdetés
-
Hardverek pünkösdre
ph E-book olvasók, komponensek és perifériák kerültek hétvégi összeállításunkba.
-
Huawei Watch Fit 3 - zöldalma
ma Megnéztük, hogy tényleg okosóra lett-e a Huawei fitnesz karperecéből.
-
SteamWorld Heist II - Középpontban a történet és a küldetések
gp A folytatás érkezésére kicsit még várni kell, az új rész augusztusban debütál.
Új hozzászólás Aktív témák
-
farad
csendes tag
Szia!
Próbáld ki...
http://www.fixyourownprinter.com/forums/inkjet/363455 flashes indicates a faulty printhead or possibly a problem with the p/head contacts. Try removing the head which is easier if you take the cartridges out first(no tools required) and re-seat it having checked the contacts for dirt.
If that doesn't work it may be that the waste ink tank is full. Try this ...
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
üdv
farad -
farad
csendes tag
Szia!
"5 flashes indicates a faulty printhead or possibly a problem with the p/head contacts. Try removing the head which is easier if you take the cartridges out first(no tools required) and re-seat it having checked the contacts for dirt."
Még egyszer nézzd meg a fej (printhead) és a chipeket érzékelő kontaktusokat (kontakt spray vagy alkohol) és hozzá csatlakozó szalagkábelt..és talán szerencséd van maga a fej nem hibás, de ha igen az pénz...
üdv
farad
Új hozzászólás Aktív témák
Állásajánlatok
Cég: Promenade Publishing House Kft.
Város: Budapest
Cég: Alpha Laptopszerviz Kft.
Város: Pécs